Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
squonk collection so far
#1
quick of my squonk collection so far. 26650 mushroom 18650 mushroom still need some copper for contacts (coming soon) and a floris delfino mech box dyed purple also have a kanger dripbox 60w more a shelf sitter right now and i may have another 18650 mushy coming soon 

[Image: DSC_0009_zpshd9ixnvb.jpg]
Reply
#2
Where are you sourcing your copper?
Reply
#3
(11-30-2016, 08:41 AM)Berk Wrote: Where are you sourcing your copper?

i found somewere on ebay doing a 100x100mm for £3 posted 

eBay item number: 262491077231
Reply
#4
Are you going across the sheet diagonally for the switch piece?
Reply
#5
(11-30-2016, 12:02 PM)Berk Wrote: Are you going across the sheet diagonally for the switch piece?


i did`nt print it myself i got it printed off 3d hubs so iam unsure how it was printed. looking at the switch it looks like it was printed with the widest part on the bottom 
Reply
#6
I meant the negative contact that runs to the strip. The measurements from the parts pdf are longer than 100mm. 69 for the upright and 37mm for the bottom bit to the battery iirc.
Reply
#7
(11-30-2016, 06:02 PM)Berk Wrote: I meant the negative contact that runs to the strip. The measurements from the parts pdf are longer than 100mm. 69 for the upright and 37mm for the bottom bit to the battery iirc.


i get you know. the copper peice on my 26650 version is long section just a smidge over 68mm and the short peice for the neg is roughly 40mm long both are from the outside edge and that peice also fits my 18650 version as i tried it in there so i could cut the copper to the right size when it arrives 

[Image: DSC_0009_zpsd8do3g1w.jpg]

[Image: DSC_0011_zpse3vudkkk.jpg]
Reply




Users browsing this thread: 1 Guest(s)