Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Smokeless Owl bottle test
#1
Reading competing forums, and some users seem be think the bottle on the smokeless owl is too soft.
I had a look in my vape box for suitable sized bottles, and found the ones from Darkstar Vapour to be an exact fit, size and threading are perfect.
On a hardness scale, with smokeless owl supplied bottle being a 5 out of 5 for softness, and a hangsen 10ml bottle being 1 out of 5, I would put the Darkstar bottles at somewhere between a 4 or a 4.5 They are squidgy, but not as squidgy as the supplied smokeless owl bottles.

Lets test.

Squonking up is fine, it isnt difficult, when you let go it squonks back much faster. Less than 1 or 2 seconds to return to original shape.
While this seems good, looking at the atty while squonking shows bad results. The bottle returns to shape so quickly that it actually sucks in air past the liquid..so the squonkback isnt sucking back liquid only, but a lot of air and a little bit of liquid. This was on 50/50 liquid. I'd expect the results to be worse with less flowy liquid..the liquid doesnt have a chance to flow back at the speed the bottle is sucking., ...higher vg percentage is what is normally used when dripping so this just gets worse. I dont use high pg juices anymore either.

*IF* the smokeless owl bottles are to be considered sub-par, then my search continues. However, it is relevant to note that I personally find them ok. They squish in, and they squish out, and the excess liquid returns fine. It looks lethargic sometimes, but it *works* fine.
I've returned to the OEM bottle now out of choice.
Box, check...juice, check...new battery, check.....SQUONK! Big Grin
Reply




Users browsing this thread: 1 Guest(s)