Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Spalted Ash project
#11
standing ovation!

And now I can see how the squonk works. From an earlier post I was confused how it would work with the bottle but thought best to keep quiet and just wait for the updates.

Stunning doobedoobedoo. The new owner will surely be pleased.
*claps*
Box, check...juice, check...new battery, check.....SQUONK! Big Grin
Reply
#12
I'm the new owner Smile
If a thing's worth doing, it's worth overdoing.
Reply
#13
nice work ron,i may have to commission you for a little mech squonker,as a returning happy customer of course
vaping is a passion not just a hobby




[Image: tumblr_n5adqxP4Vu1qm8o2po3_r1_250.gif]
[-] The following 1 user Likes cheekiecharlie's post:
  • doobedoobedo
Reply
#14
Be happy to Charlie, if by mech you mean LiPo/mosfet Smile.

I'm a bit busy with the SS and wood Dinos at the moment. I put this together while I was waiting for the resin for the windows to set. The resin I got takes a week to fully harden, but sets crystal clear.
If a thing's worth doing, it's worth overdoing.
[-] The following 1 user Likes doobedoobedo's post:
  • cindy99
Reply
#15
Yep , lipos sounds good to me I don't have any high power squonkers , im limited by Sony 18650's
vaping is a passion not just a hobby




[Image: tumblr_n5adqxP4Vu1qm8o2po3_r1_250.gif]
Reply
#16
(10-16-2015, 06:48 PM)vern Wrote: standing ovation!

And now I can see how the squonk works. From an earlier post I was confused how it would work with the bottle but thought best to keep quiet and just wait for the updates.

Stunning doobedoobedoo. The new owner will surely be pleased.
*claps*

Cheers Big Grin and just for you a finished internal shot

[Image: 20151018_010337_zpsovd9pkvb.jpg]
If a thing's worth doing, it's worth overdoing.
[-] The following 2 users Like doobedoobedo's post:
  • cheekiecharlie, vern
Reply
#17
theory meets reality.
I always assumed the bottle needed some space to expand into for it to squonk correctly...as you push the bottle, it deforms.....you have a cage around your bottle of sorts. Does it squonk well? If it does, then I can adjust my theory on squonking a bit:-)

P.S. thread moved to "Exhibition Hall" sub-forum
Box, check...juice, check...new battery, check.....SQUONK! Big Grin
Reply
#18
Stopping the bottle's expansion is fine so long as it's soft enough, which these are. There is a tiny bit of flex in the sides of the holder as they are made from 1mm ply (available from good model shops).

It squonks fine, but I may get some slightly wider bore tube as it's a very tight fit on the 510.
If a thing's worth doing, it's worth overdoing.
Reply




Users browsing this thread: 1 Guest(s)